n/a
NES toploader Power LED Upgrade KIT
NES toploader Power LED Upgrade KIT
Couldn't load pickup availability
Share
NES -101 LED Power Light Upgrade KIT
Included in this KIT:
Assembled red Led Kit, pre-wired and ready to go. Made for 5v power sources.
Very Clear Step by step instructions are found here


Cool little mod. Easy to do and does what you’d expect. Would buy again
Would buy again
I bought this kit expecting it to work with an AV Famicom, which I found that it does. The linked tutorial fully applies to the AV Famicom. Nice and affordable QoL improvement for the system, thanks!
Not a con by any means, but two suggestions if you're like me and prefer to not drill holes in plastic if you can avoid it:
1. Tape the LED into the cavity beneath the On/Off indicator text.
2. Solder the red wire to the 9V pin (left leg) instead of the 5V pin (right leg) on the voltage regulator. I found the light to be too dim when using the 5V pin, but using the 9V pin made it easier to see.